Home        Products        Ordering        Coming Events        Detailing Tips    Contact Us

WhamBAM Detailer    WhamBAM Metal Polish    WhamBAM TSR-G    The CRAP    Micro-Fiber    EZ-Rizer

WhamBAM  Professional Detail Products

  Thank You Ma'am!

                   WhamBAM  TSR-G

 Safe - Non-Streaking - Superior Cleaning Strength!

Neutral pH - Non-Hazardous - Non-Corroding

Description: WhamBAM TSR-G Cleaner was specifically formulated to address the needs of the vehicle owner or professional detailer to provide a safe alternative to the use of hazardous solvent-based and corrosive alkaline-based cleaners. WhamBAM TSR-G Cleaner is water-based and highly concentrated for versatility and cost-effectiveness in any vehicle surface maintenance situation. It can be applied in any manner - spray, brush, wipe, power washer, etc. It will not remove those coatings or any quality polish.

When used to remove grease, grime and petroleum-based residues from the engine area, TSR-G Cleaner makes it possible to perform a more thorough cleaning/degreasing.  It is an excellent way to clean out the exhaust mess from gas and diesel engine compartments in Motorhomes, Buses, Boats, Aircraft etc.  It dissolves fuel spills and exhaust coating on contact.   TSR-G Cleaner is far superior to all other surface cleaners in every way. Its cleaning performance is guaranteed! 

                  Cost-effective Solvent Replacement!

          Benefits/Advantages

Use on: Motorcycles, Cars, Trucks, RV’s, Boats, Aircraft, Trailers, 4 Wheelers, Golf Carts, ect...

Works on: Paint Finishes, Engine areas, Wheel Wells, Glass, Plastics, Lexan, Upholstery ect...

Removes: Grease, Oil films, Carbon residue, Exhaust, Brake dust, Bugs, Road Grime, and Grit...

Directions: Spray area to be cleaned; let soak up to one minute; rinse with water. First time users may find a small amount of grime left on the surface in some areas after rinsing.  This is caused by an electrostatic bonding between the grime and surface (that’s what holds dirt on the surface in defiance of gravity).  While the area is wet, just wipe clean with a cloth.  To weaken or eliminate that bonding in the future apply  WhamBAM DETAILER to entire surface when dry.  The next time you clean, virtually everything will come off. For tar and heavy grease, before rinsing, massage area with cloth or finger to loosen it up, and then rinse.  

 TSR-G Cleaner can be diluted with water by as much as 50:1 for routine cleaning in commercial application. For first time usage a 1:1 to 10:1 mix is a good starting point. When applied to a surface treated with WhamBAM DETAILER, a dilution up to 20:1 is all that is necessary.   

Experiment until you arrive at a dilution that is satisfactory in the blend of economy (more water, less cleaner) and speed (more cleaner, less water).  You may well have several dilution ratios for different jobs.  Stubborn stains are dissolved almost on contact using full strength TSR-G Cleaner, making it perfect for keeping troublesome hard to clean areas, such as engines and wheel well areas, in like new condition. You may also use TSR-G Cleaner in water to wash. JUST POUR 4 to 6 OZ. IN A BUCKET OF WATER, MIX, and WASH WITH A Micro-Fiber Cloth or Mitt.

Guaranteed: WhamBAM TSR-G Cleaner has a full customer satisfaction guarantee!

Our Promise:  All the products we add to our line are tested and used by us before we endorse or sell them to you.

We Accept all Major Credit Cards!

Just Click on any product name for a detailed explanation on each  product.

BAM Detailer    BAM Metal Polish    BAM TSR-G    The CRAP    Micro-Fiber    EZ-Rizer

Products Page     Ordering

  Call: Phil (The BAMGuy) 843-229-6779